zxappeal All American 26824 Posts user info edit post |
Need your car doctored? I can do it. I figured it was time for a new thread, so here it is.
I do mostly Asian imports, though I will work on anything domestic as well.
Give me a holler. I'm inexpensive and I do quality work. 10/3/2005 12:01:40 AM |
zxappeal All American 26824 Posts user info edit post |
bttt 10/3/2005 12:33:32 PM |
poeticwmn All American 1752 Posts user info edit post |
Dang. . . I still have to get up with you about that oil pan gasket. 10/3/2005 12:37:42 PM |
zxappeal All American 26824 Posts user info edit post |
Dang...that's right.
Ashley...shoot me your number again. I don't know what the hell I did with it. 10/3/2005 12:41:07 PM |
GiZZ All American 6982 Posts user info edit post |
i have a wheelless motorcycle. 10/3/2005 2:19:26 PM |
zxappeal All American 26824 Posts user info edit post |
To be re-wheeled very soon...PM sent, Josh. 10/3/2005 7:40:47 PM |
GiZZ All American 6982 Posts user info edit post |
10/4/2005 12:54:02 AM |
JT3bucky All American 23258 Posts user info edit post |
i have a 75 vette i would love for you to tinker on and rebuild the motor, doesnt matter how long it takes you its just sitting now witha blown 400 smallblock, blocks good and not cracked...you could keep it for as long as you need and work on it just when u have time, u know just to see how much power you can get out of it, of course i would pay for the supplies and mess, but what do u think about that offer 10/4/2005 1:37:23 AM |
divinguy04 All American 1385 Posts user info edit post |
will you change oil? and for how much 10/4/2005 10:24:23 AM |
miska All American 22242 Posts user info edit post |
how about breakpads in a '92 paseo? 10/4/2005 10:49:18 AM |
zxappeal All American 26824 Posts user info edit post |
^ & ^^...
I will do both. But I can't really cut deals on oil changes. Most places have crap for profit margins on them anyway. Primarily to get you in the door to sell other shit. I can't do an oil change for less than 20-25 bucks. It's hardly worth my time AND I have to dispose of the oil.
Brake pads on a Paseo is no problem. PM will be sent. 10/4/2005 1:39:26 PM |
Asianlai Veteran 324 Posts user info edit post |
how much $, and how much time for a clutch replacement on a 99 Altima GXE? Thanks, Jon 10/4/2005 5:15:01 PM |
stone All American 6003 Posts user info edit post |
how much to rebuild a trans in an 03 tahoe 10/4/2005 5:36:38 PM |
afripino All American 11425 Posts user info edit post |
breakpads '97 neon 10/4/2005 6:02:17 PM |
zxappeal All American 26824 Posts user info edit post |
Yep, I can do 'em. Saturday is wide open. PM will be sent. 10/5/2005 11:21:13 AM |
zxappeal All American 26824 Posts user info edit post |
back to the top... 10/5/2005 10:24:31 PM |
poeticwmn All American 1752 Posts user info edit post |
Hey will you be available this Saturday say around noon for the oil pan gasket? 10/5/2005 10:32:40 PM |
zxappeal All American 26824 Posts user info edit post |
Yep. I will. 10/5/2005 11:32:15 PM |
Josh8315 Suspended 26780 Posts user info edit post |
can you find me the insert that goes behind my door lock knob for a navy interior 91 accord lx 4 dr? 10/5/2005 11:42:18 PM |
Polter83 Veteran 422 Posts user info edit post |
pm sent.. 10/6/2005 9:48:14 AM |
Bobeugene All American 1438 Posts user info edit post |
PM sent. 10/6/2005 12:14:20 PM |
poeticwmn All American 1752 Posts user info edit post |
Call me tomorrow and we can work out the time and place and you can let me know what part(s) I need. 10/6/2005 12:26:35 PM |
BigBlueRam All American 16852 Posts user info edit post |
Quote : | "how much to rebuild a trans in an 03 tahoe " |
ahaha i told you to leave that POS alone10/10/2005 12:29:03 AM |
coolguy1335 All American 3006 Posts user info edit post |
Change my air pump on my mustang? PM me. 10/10/2005 12:30:08 AM |
Ansonian Suspended 5959 Posts user info edit post |
do you do tint? 10/10/2005 2:56:18 AM |
becka1126 New Recruit 43 Posts user info edit post |
hey...how much could you change all the brakes on my jetta for? I need the front and back done.... 10/10/2005 2:23:08 PM |
zxappeal All American 26824 Posts user info edit post |
After this weekend, I'm not doing any more work, unless you know me really well.
T'ain't worth the hassle. Sorry, folks. I'm going to start delivering pizzas. 10/10/2005 3:06:12 PM |
Malsi All American 2072 Posts user info edit post |
did you get my pm about the belt and such? 10/10/2005 3:37:09 PM |
OmarBadu zidik 25071 Posts user info edit post |
i imagine we aren't talking about body work? or are we also? 10/10/2005 4:44:50 PM |
zxappeal All American 26824 Posts user info edit post |
Maybe I should reconsider. On a case by case basis, that is. Thanks for your interest, all of you! I'll try to get in touch with each of you, but I'm finding myself trying to schedule too much, and leaving too many people hanging, which is something I don't want to do.
Bear with me! 10/10/2005 5:49:23 PM |
Isaac Veteran 479 Posts user info edit post |
Did some Serious Work on my Wrangler, replaced Slave Cyclinder along with a few other things he helped me work out, Great guy to work with, Great Price, best "mechanic" I've ever dealt with. 10/11/2005 7:05:14 PM |
poeticwmn All American 1752 Posts user info edit post |
^ Still going to try to do the oil pan gasket on that honda for me? It's getting out of control 10/11/2005 7:16:41 PM |
gephelps All American 2369 Posts user info edit post |
What can I say? He helped me out big time. He found a problem that I wouldn't have consider looking for. Now my blazer is running better than it was before it died. So if you need shit fixed give him a call.
He was more than fair and up front about everything. He even pointed out somethings that might need adjusting and fixed them as well. Instead of plowing through it and holding out his hand, he made sure everything was ok. 10/12/2005 5:26:49 AM |
therealramet All American 1659 Posts user info edit post |
in the past couple of months..i noticed my car's gas-mileage significantly dropped..and its getting worse fast. I remember when I used to get 35 mpg easily..and now, i can barely get like 28(mostly highway too)... Brand new tires just got oil changed tire air is good
It might be that the gas filter needs to be replaced? its running 105k and its never been replaced..i dont think. I know replacing the gas filter isnt cheap..so i dont want to do that unless the problem is 100% that. 10/28/2005 4:02:28 PM |
Weeeees All American 23730 Posts user info edit post |
AAAAAAA++++++ WOULD DO BUSINESS WITH AGAIN
seriously though... Dan put a new clutch in my S2000 (which i a major pain in the ass... 8+ hours) and I'm planning on taking my car back to him for whatever work he's willing to take on
[Edited on October 28, 2005 at 4:11 PM. Reason : spelling is for losers] 10/28/2005 4:11:08 PM |
zxappeal All American 26824 Posts user info edit post |
Thanks, Brian. I like workin' on them S2k's! 10/28/2005 7:42:53 PM |
ScHpEnXeL Suspended 32613 Posts user info edit post |
^^^ checked out the air filter lately? 10/28/2005 7:50:57 PM |
zxappeal All American 26824 Posts user info edit post |
Okay...back to the top. Getting into some sort of groove here, and it's looking like I have time to do some more jobs. Yell at me if you need work done, or if you've yelled at me before and I didn't answer (prolly because I was swamped) and still need work done. 11/6/2005 9:08:17 PM |
bous All American 11215 Posts user info edit post |
how much (only labor of course) to put new front brake pads/rotors on a tahoe? just gonna buy durolast rotors and some lifetime pads for the front. the back drum/shoes i think are fine.
will need the brake job within next 2 months or so.
also, can you check the brake line by chance? seems like i can push the pedaldown too far before response in the brakes. 11/6/2005 10:26:52 PM |
zxappeal All American 26824 Posts user info edit post |
Pushing the pedal down too far usually means either (a) the rears brakes are out of adjustment. They are most likely drum brakes, and even though they have self adjusters, I haven't seen one that adjusted really well. (b) Air in the lines. This is a big contributor to excessive pedal travel. Air is compressible. Brake fluid is not. You get air in the lines (even a tiny bubble), and it can increase pedal travel.
Hoses very rarely contribute to the problem you describe, as they have a teflon inner liner and don't swell. Unless of course the liner breaks...but then you most likely experience brakes that apply but do not release. The fluid back pressure pinches the liner shut.
Oh...if your front rotors are slip-on (and memory says they are), then between 35 and 40 bucks to put the pads and rotors on. If I have to start taking apart hubs and shit, it gets more expensive. But you don't have that to worry about.
[Edited on November 6, 2005 at 10:41 PM. Reason : more info...] 11/6/2005 10:36:41 PM |
bous All American 11215 Posts user info edit post |
so should i take my car to a place that does a free brake check, tell you the problem, you fix cheaper than if you have to diagnose it? or can you do a free diagnosis? 11/6/2005 10:42:36 PM |
zxappeal All American 26824 Posts user info edit post |
Tell you what...you get me to do your front brakes, and I'll clean and adjust the rears.
Now as far as the bleeding thing goes, that's 30 bucks extra, provided I can do it. I'm not sure about the ABS setup on your truck. If it has rear only, or a passive style system, then no problem. If it's active (usually as part of an integrated traction control) then you're gonna have to find a shop equipped to handle it.
What year is the truck? 11/6/2005 10:47:59 PM |
bous All American 11215 Posts user info edit post |
doh, sorry. 1999 tahoe, 4wd, 4door. 11/6/2005 10:54:04 PM |
zxappeal All American 26824 Posts user info edit post |
^ I can and will do the fifteen-minute check-it-out for free. You bring to my place, I'll check 'er out.
For everybody else...BTTT. 11/7/2005 12:49:08 PM |
mdashali Veteran 232 Posts user info edit post |
I have a 97 Acura 2.2CL that needs some maintenance. It is getting very hesitant nowadays. Also, the Idle seems to be at decent 750 (should be 770+/-50) but then there is more vibration than it is used to. Thought I will clean the throttle body and IAC and also change the fuel filter. What is your estimate for time and labor on this?
Thanks. 11/7/2005 1:15:46 PM |
zxappeal All American 26824 Posts user info edit post |
PM sent 11/7/2005 1:58:24 PM |
afripino All American 11425 Posts user info edit post |
i still need my brakes done. will u have time on friday or possibly sat? 11/7/2005 3:37:10 PM |
zxappeal All American 26824 Posts user info edit post |
Friday nite after 8pm. Saturday after 6:30 or 7:00 pm. Sunday is tentatively booked up. 11/7/2005 4:07:25 PM |
zxappeal All American 26824 Posts user info edit post |
BTTT. 11/9/2005 12:01:56 AM |
afripino All American 11425 Posts user info edit post |
i can do saturday after 7. just tell me where/when to get to u. 11/9/2005 11:49:40 AM |