Can you get 2 amps of current, 5 volts from the usb bus using a laptop?

4/20/2006 11:45:23 AM

Nope - USB is .5 amps.

4/20/2006 11:55:43 AM

http://en.wikipedia.org/wiki/USB#Power_supply

"A given segment of the bus is specified to deliver up to 500 mA. This is often enough to power several devices, although this budget must be shared among all devices downstream of an unpowered hub. A bus-powered device may use as much of that power as allowed by the port it is plugged into.

Bus-powered hubs can continue to distribute the bus provided power to connected devices but the USB specification only allows for a single level of bus-powered devices from a bus-powered hub. This disallows connection of a bus-powered hub to another bus-powered hub. Many hubs include external power supplies which will power devices connected through them without taking power from the bus. Devices that need more than 500 mA must provide their own power.

When USB devices (including hubs) are first connected they are interrogated by the host controller, which inquires of each their maximum power requirements. The host operating system typically keeps track of the power requirements of the USB network and may warn the computer's operator when a given segment requires more power than is available (and will generally shut down devices or hubs in order to keep power consumption within the available resource).

A number of devices use this power supply without participating in a proper USB network. The typical example is a USB-powered reading light, but fans, battery chargers (particularly for mobile telephones) and even miniature vacuum cleaners are available. In most cases, these items contain no electronic circuitry, and thus are not proper USB devices at all. This can cause problems with some computers—the USB specification requires that devices connect in a low-power mode (100 mA maximum) and state how much current they need, before switching, with the host's permission, into high-power mode.

Some USB devices draw more power than is permitted by the specification for a single port. This is a common requirement of external hard and optical disc drives and other devices with motors or lamps. Such devices can be used with an external power supply of adequate rating; some external hubs may, in practice, supply sufficient power. For portable devices where external power is not available, but not more than 1 A is required at 5 V, devices may have connectors to allow the use of two USB cables, doubling available power but reducing the number of USB ports available to other devices. Amongst others, a number of peripherals for IBM laptops (now made by Lenovo) are designed to use dual USB connections."

4/20/2006 11:56:40 AM

thanks guys.

4/20/2006 11:58:03 AM