stopdropnrol All American 3908 Posts user info edit post |
go out to start the jeep turn the key and absolutly nothing. my voltage shoots up , windows lights, streo etc. all work fine. no clicking or anything from the starter, but i swapped that out just to be sure, then tried jumpin it ... still nothing. just realized the jeep acts alot like it's not completly in park i'll have to catch a ride back across town to make sure the park is fully engaged.
In the meantime can you guys think of anything it could be ??
[Edited on May 8, 2007 at 12:41 PM. Reason : could be in nuetral. ] 5/8/2007 12:30:36 PM |
69 Suspended 15861 Posts user info edit post |
go buy a voltmeter and a shop manual with a wiring diagram and get to it 5/8/2007 12:42:18 PM |
stopdropnrol All American 3908 Posts user info edit post |
just checked and it is in park. 5/8/2007 3:29:11 PM |
BigBlueRam All American 16852 Posts user info edit post |
starter relay 5/8/2007 3:51:50 PM |
stopdropnrol All American 3908 Posts user info edit post |
i tired swapping the relays around. i swapped it for the fule pump relay but still nothing. 5/8/2007 3:53:50 PM |
stopdropnrol All American 3908 Posts user info edit post |
could it be the crank shaft postion sensor or the actualt igntion switch??
either way anybody wanna make some $$ towing my jeep about 3 miles? i don't mind paying a tow turck but i'd rather help some1 here and save some $ while i'm at it. 5/8/2007 6:54:31 PM |
Jeepman All American 5882 Posts user info edit post |
if it was the cps it would turn over, etc. just no spark at all, had to do one of those when i swapped engines. 5/8/2007 7:11:58 PM |
69 Suspended 15861 Posts user info edit post |
year? model? 5/8/2007 7:35:45 PM |
peakfan09 Veteran 130 Posts user info edit post |
i know some jeeps have a neutral safety switch, did you try starting it in neutral? 5/8/2007 9:01:58 PM |
sethncsu New Recruit 22 Posts user info edit post |
My Jeep did that the other week... turns out the wires were a little loose on the battery posts and I had some corrosion on the posts. It was making a connection, just not a good enough one to start it. Try taking the wires off, cleaning the post and wires and tighten them back up good. Worth a shot... 5/8/2007 9:05:02 PM |
69 Suspended 15861 Posts user info edit post |
^ can you read?
Quote : | "my voltage shoots up , windows lights, streo etc. all work fine. no clicking or anything from the starter," |
5/8/2007 9:05:44 PM |
jee Veteran 187 Posts user info edit post |
jeepman is right, had trouble with mine last week, would turn but no spark, turns out to be the crankshaft position sensor. key maybe?? good luck 5/8/2007 9:45:32 PM |
69 Suspended 15861 Posts user info edit post |
^ can you read?
Quote : | "no clicking or anything from the starter" |
5/8/2007 9:49:46 PM |
benXJ All American 925 Posts user info edit post |
NSS
/thread
on that note, run the shifter through all the gears fairly fast and then try to start it in park and neutral. i have to actually hold my shifter between N and R sometimes for it to start. 5/8/2007 10:53:44 PM |
69 Suspended 15861 Posts user info edit post |
try jumping a wire from the positive battery post to the small wire terminal on the starter, if it cranks, then you need to ground the brown/yellow wire at the neutral safety switch connector on the tranny by the shifter, it it cranks with the key, then the switch is bad, if not, then i'll go on from there 5/8/2007 11:03:20 PM |
sethncsu New Recruit 22 Posts user info edit post |
CAN YOU READ? I said that mine did the same thing. Maybe you just have trouble comprehending things. By saying mine did the same thing, I meant my accessories worked as well and it wouldn't start. I cleaned up the connection and haven't had any trouble sense.5/9/2007 7:30:22 AM |
69 Suspended 15861 Posts user info edit post |
Quote : | "my voltage shoots up , windows lights, stereo etc. all work fine" |
look here you stupid mother fucker, first of all if you don't maintain your shit and let you battery terminals get that bad, you are just fuckin retarded, second, if the fucking lights etc are working and do not die when he tries to crank it, then a corroded terminal is not the problem
and unless you have some real advice besides what your sister taught you about cars, then get the fuck outta here or shut the fuck up
and if he swapped the starter already, its a safe fuckin assumption that he checked the god damned terminals
[Edited on May 9, 2007 at 7:37 AM. Reason : stupid fuck]5/9/2007 7:35:50 AM |