User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » Troubleshoot my newly built PC Page [1]  
Specter
All American
6575 Posts
user info
edit post

Components:
Turbolink ATX 500W
MSI P6N-SLI LGA 775
2x 1GB Patriot DDR2-800
E6600 w/ Arctic Freezer 7
8800GTS 320MB
SATA HD & IDE DVD

Problem:
None of the components are turning on. When I press the switch, the fans spin for a split second. No other components activate, and the only other activity I see is an LED next to CMOS battery glowing. (Mobo is getting power)

Troubleshooting steps:
-Swapped PSU's, both of them yield same behavior. Also, PSU just came out of another box, so its good.
-Removed RAM, Video Card; disconnected drives and front panel devices and tried powering on. Still no change.
-I thought I might've connected the power switch lead to the wrong pins, but after consulting the manual, it seems to be correct.
-I want to say the motherboard is dead, but it is getting power, as the CPU fan spins.

I can't figure out what else could possibly be wrong. What else should I check? I will also go ahead and mention that the RAM that I have is not one of the motherboard's "recommended" models, but i highly doubt that would be the cause to this problem.

[Edited on July 20, 2007 at 5:00 PM. Reason : ]

7/20/2007 4:57:19 PM

Opstand
All American
9256 Posts
user info
edit post

Clear CMOS jumper? Usually if it's in the reset position nothing will spin up but maybe that could be the problem. Could be a bad PSU...

7/20/2007 5:00:46 PM

Stein
All American
19842 Posts
user info
edit post

Is the light on the motherboard staying on all the time?

It sounds like the motherboard is shorting out.

7/20/2007 5:05:42 PM

Shrike
All American
9594 Posts
user info
edit post

^What he said.

You might have to remove the motherboard completely from the case and make sure there isn't something under it that is shorting it out. Before you do that though, try just kinda jiggling the main PSU power header or unplugging and leaving it out for a while before plugging it back in.

7/20/2007 5:09:55 PM

Specter
All American
6575 Posts
user info
edit post

Good call guys. I loosened up the motherboard screws and it came right on. I guess I had them on too tight. Thanks a bunch

7/20/2007 5:17:25 PM

 Message Boards » Tech Talk » Troubleshoot my newly built PC Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.38 - our disclaimer.