User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » Computer rebooting when touching outside of case? Page [1]  
bous
All American
11215 Posts
user info
edit post

could the power supply not be grounding the case somehow? i go to plug in a usb keychain or something and when the metal touches it just restarts the computer. it's plugged up to a battery backup system... could that be messed up and not grounding properly? or just psu not grounding?

i'm confused as i've never seen this before.

1/21/2008 10:21:31 PM

darkone
(\/) (;,,,;) (\/)
11609 Posts
user info
edit post

Check your case grounding. i.e. any exterior metal grounding to the interior superstructure

My Reference:
http://www.avsforum.com/avs-vb/showthread.php?t=805677

Another Idea:
http://www.wirelessforums.org/alt-comp-hardware/computer-reboots-when-metallic-object-touch-case-17549.html
Quote :
"Years ago I traced a winter time pc rebooting problem to a cheap pc power
supply. That power supply used a grounded cord, but inside the box I found
the manufacturer failed to connect the ground wire to anything (unbelievably
bad, but true).

I strongly suspect you have found a grounding problem. Bad grounding could
result from a bad power cord, bad power supply, faulty UPS, faulty wall
outlet, and more. Ask a friend with a Multimeter (Volt/Ohm meter) to test
the electrical ground path of the computer case and the system board to the
AC outlet ground lug. Tighten loose motherboard screws too (often at least
one will be metal, screwing into a metal stud on the case).
"

1/21/2008 10:52:12 PM

Prospero
All American
11662 Posts
user info
edit post

does the computer ever really lose power? or does it just restart?

1/21/2008 11:02:31 PM

bous
All American
11215 Posts
user info
edit post

just reboot

also, 2 drives have failed in this pc (stopped spinning completely, no power at all)

i'll take the UPS out of the equation and see if it still does it. if so, i'll replace the PSU with a spare i have. if that doesn't do it, it's gotta be the mb or reset switch picking up interference or something

[Edited on January 22, 2008 at 12:34 AM. Reason : ]

1/22/2008 12:28:18 AM

Prospero
All American
11662 Posts
user info
edit post

what kind of psu is it?

check to make sure the motherboard and screws are grounded

most signs point to yes considering how quickly each died

[Edited on January 22, 2008 at 12:31 AM. Reason : .]

1/22/2008 12:30:48 AM

bous
All American
11215 Posts
user info
edit post

enermax 465 watt

Quote :
"check to make sure the motherboard and screws are grounded"


mb is screwed in tight with metal screws and are all touching the case

[Edited on January 22, 2008 at 12:34 AM. Reason : ]

1/22/2008 12:34:28 AM

jaZon
All American
27048 Posts
user info
edit post

stupid question, but i'm assuming you're using the motherboard standoffs?

1/22/2008 12:31:47 PM

jbtilley
All American
12791 Posts
user info
edit post

You'd about have to use the standoffs - otherwise how are you getting your I/O ports to line up in the back? Wouldn't your graphics card be in at an angle as well?

1/22/2008 12:38:47 PM

jaZon
All American
27048 Posts
user info
edit post

I suppose it could depend on the case?

Just curious. I'm sure he's using them

[Edited on January 22, 2008 at 12:41 PM. Reason : ]

1/22/2008 12:40:25 PM

smoothcrim
Universal Magnetic!
18955 Posts
user info
edit post

I've seen this before, never found the source, but grounding was always my guess.

1/22/2008 1:38:39 PM

bous
All American
11215 Posts
user info
edit post

the motherboard is touching metal screw holders that is touching the metal case that is touching the metal power supply.

i'm using the exact same case setup in another pc and that pc has no problem.

1/22/2008 1:43:17 PM

Grandmaster
All American
10829 Posts
user info
edit post

would using those wrist straps while plugging in the usbkey eliminate that variable?

1/22/2008 1:51:06 PM

Stein
All American
19842 Posts
user info
edit post

What if you try plugging it in to a different outlet on the wall?

1/22/2008 1:52:44 PM

Prospero
All American
11662 Posts
user info
edit post

^that might be the case where the outlet isn't grounded properly

or how about tie a ground wire from the case to something grounded

[Edited on January 22, 2008 at 2:02 PM. Reason : .,]

1/22/2008 2:02:06 PM

bous
All American
11215 Posts
user info
edit post

plugged it in a different outlet and can't reproduce it. doesn't mean it's fixed, but i'll keep trying to break it

1/22/2008 8:36:33 PM

bous
All American
11215 Posts
user info
edit post

i think it was the power supply. put in an earthwatts and been up a week without the previous problems.

2/7/2008 8:27:45 AM

 Message Boards » Tech Talk » Computer rebooting when touching outside of case? Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.38 - our disclaimer.