BigMan157 no u 103354 Posts user info edit post |
yeah so i have a bad CV joint that i need diagnosed and repaired (since i'm not sure if a new boot is all it needs or what), can anyone recommend a good mechanic in the campus area?
also, what would this typically run price- and time-wise? (02 monte carlo if that 's relevant at all) 6/3/2008 12:53:34 PM |
toyotafj40s All American 8649 Posts user info edit post |
it's so easy it hurts. do it urself. 6/3/2008 1:05:37 PM |
Aficionado Suspended 22518 Posts user info edit post |
just replace it
they are generally not worth fixing 6/3/2008 1:29:16 PM |
arghx Deucefest '04 7584 Posts user info edit post |
If you've never pulled off front suspension/drivetrain before, I wouldn't say it's "so easy it hurts" , not that it can't be done for a first timer though... 6/3/2008 2:40:51 PM |
Seotaji All American 34244 Posts user info edit post |
if the boot has a tear that is fresh, like it just tore today, then get a new boot for half the price of a new CV joint.
if the boot has been torn for a while and the grease is contaminated, then replace the thing with a reman. unit.
$200 for one cv joint (not sure if it's inner or outer). 6/3/2008 4:36:51 PM |
Igor All American 6672 Posts user info edit post |
Quote : | "$200 for one cv joint" |
wtf kind of car do you drive? those things were like 60-70 bucks for anything i ever owned. and that's for the entire half-axle. i didnt even know they sell joints individually, let alone for 200 bucks a piece
[Edited on June 3, 2008 at 5:49 PM. Reason : even cheaper after core return]6/3/2008 5:44:34 PM |
BigMan157 no u 103354 Posts user info edit post |
so, mechanic? 6/3/2008 8:32:20 PM |
slowblack96 All American 4999 Posts user info edit post |
Quote : | " i have a bad CV joint that i need diagnosed " |
looks lik you already did that. lol good luck6/3/2008 8:42:03 PM |
Seotaji All American 34244 Posts user info edit post |
Quote : | "wtf kind of car do you drive? those things were like 60-70 bucks for anything i ever owned. and that's for the entire half-axle. i didnt even know they sell joints individually, let alone for 200 bucks a piece
[Edited on June 3, 2008 at 5:49 PM. Reason : even cheaper after core return]" |
that's if a mechanic replaces it. it was around $160-180, but it's gone up. yeah i don't know what i'm talking about. i meant one side, not inner/outer.6/3/2008 9:14:31 PM |
statepkt All American 3592 Posts user info edit post |
I just replaced 2 axles, because the CV joints were leaking.
With the prices of new axles, its not worth the extra effort of repairing the joints.....assuming the new axles are good quality. 6/3/2008 9:55:46 PM |
BigMan157 no u 103354 Posts user info edit post |
6/4/2008 7:16:21 AM |
d7freestyler Sup, Brahms 23935 Posts user info edit post |
Quote : | "With the prices of new axles, its not worth the extra effort of repairing the joints.....assuming the new axles are good quality." |
i got a full half shaft installed at the AAA place on the corner of Avent Ferry and Gorman for around $250, iirc. they were pretty nice guys. i'd recommend them.6/4/2008 7:32:30 AM |
Chief All American 3402 Posts user info edit post |
^^Yes, just ask around at a few places to see who's the cheapest, there's a lot of independent/cheaper repair shops near the S. Saunders street area. Try Gower's. 6/4/2008 10:30:22 AM |
statepkt All American 3592 Posts user info edit post |
FYI as to costs for the job.....
I got my axles for $70 brand new. I can rip out an axle and replace it in about 1-2 hours, without a full lift. That should give you a pretty round estimate of the job cost.
I would fully expect the garage to charge you for at least 3 hours of labor
[Edited on June 4, 2008 at 11:43 AM. Reason : .] 6/4/2008 11:36:25 AM |
d7freestyler Sup, Brahms 23935 Posts user info edit post |
they will indeed 6/4/2008 12:11:55 PM |
BigBlueRam All American 16852 Posts user info edit post |
^^keep in mind you're probably talking about remanufactured axles, not new. 6/4/2008 1:10:17 PM |
buttseks Suspended 1227 Posts user info edit post |
depends on the car, i just did a mazda 6 that was only available through the dealer, 2 months out of warranty, try $340 on for size
carquest, t-hoff, carolina motor parts, autozone, oreily, adavnce and couldn't find it online, some axles arent that damn cheap 6/4/2008 4:57:48 PM |
BigMan157 no u 103354 Posts user info edit post |
i'm just doing it through the dealer
i'm gonna get screwed over on price, but fuck it, at least i know they can do it 6/4/2008 5:13:40 PM |
buttseks Suspended 1227 Posts user info edit post |
6/4/2008 6:00:10 PM |
Chief All American 3402 Posts user info edit post |
Damit BigMan, you're better than this. 6/4/2008 6:21:42 PM |
ScHpEnXeL Suspended 32613 Posts user info edit post |
Quote : | "Damit BigMan, you're better than this.
" | 6/4/2008 7:45:11 PM |
BigMan157 no u 103354 Posts user info edit post |
2 boots + 1 bearing + 1 alignment = 1 grand
[fail]
oh well, fuck it 6/5/2008 10:12:30 AM |
buttseks Suspended 1227 Posts user info edit post |
1 new shaft + 45 minutes of work in the driveway = $100 6/5/2008 10:16:47 AM |
Igor All American 6672 Posts user info edit post |
^+1 6/5/2008 10:22:59 AM |
BigMan157 no u 103354 Posts user info edit post |
that's the plan next go-around 6/5/2008 10:32:19 AM |
slowblack96 All American 4999 Posts user info edit post |
well for that much money it should do the work it self next time. this set should last the rest of the time you own the car 6/5/2008 11:31:36 PM |