User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » Loose Connector on USB Jump Drive Page [1]  
kNCSUw
Starting Lineup
87 Posts
user info
edit post

Hi,

The USB connector to my 4GB SanDisk Jump Drive is loose so I can not access my data from the drive. I went to the NCSU OIT Walk-in Center and the guys said that my jump drive needs to be soldered back together in order to retrieve the data. They suggested I call Best Buy and try here. I did call Geek Squad and they said that they will not be able to get my data recovered any sooner than 2 weeks. I wanted to know if there are any local places (or any one experienced in soldering) I can go to in order to get my data back as soon as possible?

Thanks!

1/26/2011 1:07:29 PM

quagmire02
All American
44225 Posts
user info
edit post

there are definitely some folks on tww that CAN do it

you can always post an ad around the ECE buildings on centennial, too

1/26/2011 2:09:45 PM

FenderFreek
All American
2805 Posts
user info
edit post

I can do the soldering if you want to meet me near campus to drop it off and pick it up. It'll probably take me an evening to get done, so I can get it one day and bring it back to you the next.

1/26/2011 2:44:15 PM

kNCSUw
Starting Lineup
87 Posts
user info
edit post

Thank you two for responding! I carefully took it apart, which was amazingly easy (don't know if that is a good thing). I wanted to see exactly where the connector pins were broken. I took some pictures:





Andrew, would you still be able to solder the pins back to the broken pieces inside the red portion of usb connector?

(Disclaimer: I am no means an expert with this stuff but I am an engineer and like to see how things are put together... )

1/26/2011 3:11:47 PM

Arab13
Art Vandelay
45180 Posts
user info
edit post

no i think he's just gonna get the data off of it... (straight wire connection)

that or replace the plug portion entirely

still kinda cheap

[Edited on January 26, 2011 at 3:47 PM. Reason : e]

1/26/2011 3:46:46 PM

kNCSUw
Starting Lineup
87 Posts
user info
edit post

Yeah, all I need is the data. What is a straight wire connection?

1/26/2011 4:02:59 PM

Arab13
Art Vandelay
45180 Posts
user info
edit post

he's gonna attach 4-6 wires (not sure how many to be honest) to the prongs directly from a unraveled USB cable... or something similar (not unraveled very much either)

1/26/2011 4:08:45 PM

kNCSUw
Starting Lineup
87 Posts
user info
edit post

Ohhh, I gotcha! That makes sense. Thanks for the clarification! It really doesn't matter which way it is done, I just hoping someone around here can successfully get my data asap without me having to pay over $300 to get it done somewhere else. One place said $700! Crazy!

Lesson learned...backup data on a MORE regular basis in more than one place.

You guys are pretty helpful!

1/26/2011 4:16:11 PM

Creaver
All American
1193 Posts
user info
edit post

4 Pins - 2 Differential Data Lines, 1 Power (5V), and GND.

If you get a new connector just solder the new one to those 4 pins on the chip portion.

1/26/2011 4:18:03 PM

kNCSUw
Starting Lineup
87 Posts
user info
edit post

Thanks Creaver!

Is there anyway that I can do the straight wire connection myself?

When I cut the end of a USB cord and peeled away some of the rubber, I saw the following cords:

red
white
black
green cord
a small bundle of copper/silver wires wrapped around each other



Can I just connect the four colored wires to the four connector pins for the jump drive to work?

[Edited on January 26, 2011 at 4:39 PM. Reason : picture didn't show up]

1/26/2011 4:38:30 PM

FykalJpn
All American
17209 Posts
user info
edit post

http://diskdrive.wordpress.com/2008/02/21/flash-read-error-flash-drive-not-recognized-how-to-repair-usb-flash-drive/

1/26/2011 5:21:37 PM

kNCSUw
Starting Lineup
87 Posts
user info
edit post

Great link! Thanks for that. Now that I figured out which wires go where, I only have one more issue...I don't have the soldering tools. Can I use super glue as a quick fix? I know it is probably not the most ideal thing to use...

1/26/2011 6:09:41 PM

FykalJpn
All American
17209 Posts
user info
edit post

I'm gonna bet that superglue is an insulator and say no

1/26/2011 6:19:41 PM

kNCSUw
Starting Lineup
87 Posts
user info
edit post

Yeah, I was talking about place the wire on top of its corresponding pin so the two metals touch and then applying a small dab of super glue on top wire in hope that it will stay in place long enough to transfer the data. Guess that wouldn't work either. How about using hot glue on top of the wire and a little on the pin to keep them connected and in place?

My apologies for throwing out other alternatives...I don't have access to a soldering tool.

1/26/2011 6:49:17 PM

FenderFreek
All American
2805 Posts
user info
edit post

You can definitely do it that way if you can assure that the connections all stay tight and that you get the pinouts correct. The more reliable method is what others have suggested and what I had intended to do - just take a cut cable like that and solder to the pins.

Sent you a PM about availability if you still want me to work on it.

[Edited on January 26, 2011 at 10:25 PM. Reason : .]

1/26/2011 10:14:31 PM

smoothcrim
Universal Magnetic!
18968 Posts
user info
edit post

as long as you make sure the wires are contacting the pins under the glue, it will work. hot glue is a better choice as you can hold the wires in place with a paper clip or something, glue it, and pull the paper clip out while the glue is still molten, leaving everything in place

1/27/2011 9:13:58 AM

FenderFreek
All American
2805 Posts
user info
edit post

I just soldered a plug onto the PCB, pretty straightforward. Data is safe.

Be sure and file this under "positive things TWW has done". Precious and few, those moments are.

1/27/2011 7:00:11 PM

 Message Boards » Tech Talk » Loose Connector on USB Jump Drive Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.39 - our disclaimer.