i have a time warner modem/router - Arris TG something and i have hacked DD-WRT cisco router hardwired to the time warner modem. These two are about 100ft apart.

I'm trying to use qBittorrent on port 49152.


For the sake of this R1 = time warner, R2 = DDWRT

logging into R1 - 192.168.0.1, i go to client list and it shows R2 as 192.168.0.5

I port go into R1 and set 192.168.0.5 for BOTH on port 49152 in Port Forwarding and Port Triggers.

I log into R2 - 192.168.1.1 and make sure UPnP is turned on sure. qTorrent shows up in UPnP list as forwarding both 49152.

Obviously this is not working. I'm thinking i need to set R2 into bridge mode some how into the R1.


[Edited on January 8, 2016 at 10:32 PM. Reason : d]

1/8/2016 10:31:28 PM

nevermind, figured it out.

1/9/2016 3:08:16 PM

what'd you do?

1/9/2016 3:09:49 PM

http://www.jamesstroud.com/jamess-miscellaneous-how-tos/networking/wired-wireless-switch-with-dd-wrt


Pretty slick. Port forward and upnp also work.


Note: Twc routers use 192.168.0.1 subnet so just translate to that not 192.168.1.1

[Edited on January 9, 2016 at 4:14 PM. Reason : Sub]

1/9/2016 4:13:09 PM

put your router in DMZ of the time warner router but better to just put the TW router in bridge mode

1/9/2016 10:31:10 PM

yeah i guess i could have done that.

1/10/2016 6:53:34 AM

I do not understand any of this except for the thing about putting one router in bridge mode.

1/11/2016 2:40:55 PM

what OP did sounds like what I had to do to get my Tor middle relay working

1/20/2016 12:30:34 AM