my full hydro is streetable for sure.

1/10/2006 8:39:41 AM

where is there a metal scrap yard near campus, or somewhere local?

1/12/2006 2:18:08 PM

t&t out in garner. dunno if they'll sell anything though. what do you need? i've got a fair amount of stuff on hand i might could sell.

1/12/2006 2:30:48 PM

some tiny scraps of 4x4 and a 48" peace of 2x4 or something else i can make my cross member out of i wanna try to hang the axle this weekend cuz of the warm weather

1/12/2006 2:36:37 PM

all i've got in square stock is 2x2 and 3.5x3.5. if you want to buy a whole stick of 2x4, i'd buy whatever you don't use from you.

1/12/2006 2:49:58 PM

i'm just scared to see how much that's gonna cost

1/12/2006 2:56:29 PM

dunno, i think the last time i bought a 20ft. piece it was around 50 bucks. that was before steel prices went up so much though.

1/12/2006 3:17:17 PM

^got any 3/16" plate?

know where i could get some?

word

1/12/2006 3:45:54 PM

none that i want to sell, sorry. i use it alot for boxing brackets, capping ends, gussets, etc. how much do you need? you can get smaller pieces of plate from lowes, etc.

1/12/2006 3:48:04 PM

nah i need fairly large pieces of it....at least 18"x24" or bigger

any ideas?

1/12/2006 5:07:29 PM

apex steel will sell smaller sizes, try them. otherwise, you'll have to get a whole 4x8 sheet from dillon or something. dillon will cut it up into smaller sizes, but you still have to buy/take the whole piece though...

1/12/2006 5:25:36 PM

i guess i'm going to dillion tomarrow any prefrence on thickness if not i'm gonna get some pretty heavy stuff

1/12/2006 11:03:53 PM

for the cross member stuff, go with 1/4", weighs a bit more, but will have plenty o beef...just design and brace it well

[Edited on January 12, 2006 at 11:35 PM. Reason : ]

1/12/2006 11:28:59 PM

[Edited on January 12, 2006 at 11:44 PM. Reason : shit.]

1/12/2006 11:44:12 PM

^^^3/16 is just fine.

1/13/2006 3:05:21 AM

still an expensive proposition to buy a 4x8 sheet though

1/13/2006 9:55:37 PM