chickenhead
47844 Posts user info edit post |
3 8/27/2007 3:25:05 PM |
chembob Yankee Cowboy 27011 Posts user info edit post |
I'll say it again
I stand in awe of you gentlemen. 8/27/2007 3:30:05 PM |
Mr. Joshua Swimfanfan 43948 Posts user info edit post |
Quote : | "As a matter of fact, the sound of twin Pratt & Whitney Double Wasp radial engines ranks up there with the sound of a diesel engine and enthusiastic cries of "Oh God yes"" |
When I was out in Missoula there was a company based out of the local airport that had between 3 and 5 DC-3 turboprop conversions that were just beautiful. Although after reading about the cost of converting a DC-3 to turboprop I don't really see how its any more economical than buying a used twin Otter or something.
Then when I flew into San Juan, Puerto Rico there were at least 2 dozen DC-3 just rotting in the sun. 8/27/2007 3:31:31 PM |
mootduff All American 1462 Posts user info edit post |
MRAPs arent mine-proof
they only increase post-incident survivability by directing the blast from up through the floor to the sides of the vehicle
i.e. youre still alive after the blast, but still probably not going anywhere 8/27/2007 3:43:06 PM |
zxappeal All American 26824 Posts user info edit post |
Quote : | "I'll say it again
I stand in awe of you gentlemen." |
Mayhap you elaborate on that?
^Now THAT makes perfect sense. Hence the V-hull construction.
Quote : | "Then when I flew into San Juan, Puerto Rico there were at least 2 dozen DC-3 just rotting in the sun." |
That is a crying shame.
[Edited on August 27, 2007 at 3:52 PM. Reason : Dead Gooneys...]8/27/2007 3:49:26 PM |
zxappeal All American 26824 Posts user info edit post |
Dat be right, muthafluckas 8/27/2007 7:06:53 PM |
gk2004 All American 6237 Posts user info edit post |
werd 8/27/2007 8:56:20 PM |
BigBlueRam All American 16852 Posts user info edit post |
Quote : | "So you want to travel--theorectically--like James West and Artimus Gordon?" |
eh, my idea goes more like festival express.
underPSI, i saw a couple of big ladder trucks rolling down new bern out of downtown one day last week (just cruising, no lights/sirens). you on them?
[Edited on August 27, 2007 at 10:17 PM. Reason : .]8/27/2007 10:17:25 PM |
Seotaji All American 34244 Posts user info edit post |
apparently those mack firetucks are so popular that there are still fore departments out there that refurbish them until they die. 8/27/2007 10:31:41 PM |
Jeepman All American 5882 Posts user info edit post |
i want a firetrucks 8/27/2007 11:14:36 PM |
zxappeal All American 26824 Posts user info edit post |
^^That's because the Macks are BULLETPROOF.
A lot of the older firetrucks you see built by Pearce and American LaFrance were powered by Detroit Diesel 2-strokes and Allison automatics. The DD engines just don't last like the Maxidyne 237 engines.
Most trucks are a conglomeration of different powertrain manufacturers. Mack trucks have the distinguishing fact that they are ALL MACK. Mack builds (or used to build) their own engines, transmissions, axles, etc. For the longest time, you couldn't even buy a Mack with an automatic, which is why Raleigh's old Macks all have manual transmissions.
The oldest truck I drove was a '72 Mack that had been wrecked and rebuilt. The truck WAS ONE YEAR YOUNGER THAN I WAS. 8/28/2007 8:10:27 AM |
jackleg All American 170957 Posts user info edit post |
whats on page one that locked up a brand new core2 extreme?
[Edited on August 28, 2007 at 8:13 AM. Reason : and almost did it again on the reply] 8/28/2007 8:13:04 AM |
zxappeal All American 26824 Posts user info edit post |
A couple of YouTube scripts might have done it. The Prodigy doing "Diesel Power" and Chemical Bros. "Galvanize"
Everything else is just pics (simple html, nothing more). 8/28/2007 8:37:56 AM |
zxappeal All American 26824 Posts user info edit post |
Just for shits and giggles...bttt. 8/28/2007 4:01:56 PM |
gk2004 All American 6237 Posts user info edit post |
No PSD love in this thread?
[Edited on August 28, 2007 at 8:45 PM. Reason : ?] 8/28/2007 8:43:51 PM |
BigBlueRam All American 16852 Posts user info edit post |
page 1 works fine for me.
^you know i've got some psd love. i'd still rather be CUMMIN than STROKIN though.
[Edited on August 28, 2007 at 8:47 PM. Reason : no pics of my psd...] 8/28/2007 8:45:42 PM |
gk2004 All American 6237 Posts user info edit post |
ttt 8/28/2007 11:07:15 PM |
zxappeal All American 26824 Posts user info edit post |
Quote : | "^you know i've got some psd love. i'd still rather be CUMMIN than STROKIN though." |
Ivan for the win on this one.
CUMMINZZZ DZLPOWA. 'nuff said.
Shall I reiterate:
Quote : | "there's no better sound. Except for a female beckoning the Almighty as she rakes her nails down yer back... " |
8/29/2007 8:21:13 AM |
chembob Yankee Cowboy 27011 Posts user info edit post |
Quote : | "Mayhap you elaborate on that?" |
Well, I'm certainly not an expert on engines and motors and cars and trucks. But hearing you guys talk about them makes me feel like a little kid trying to hang around his older brother and his friends. But, I'll admit. I love the sound of diesel. I even love the smell of diesel.
DZLPOWA powers American industry, and DZLPOWA wins America's wars.9/1/2007 11:03:31 PM |
zxappeal All American 26824 Posts user info edit post |
That's kinda funny; engines have been one of my passions since I was in elementary school. My cousins were always so into the hotrod thing, and I felt like that a lot. Difference is/was that I was also into big trucks and heavy machinery.
A couple of my favorite shows as a kid: "The Dukes of Hazzard" and "BJ and the Bear"... 9/1/2007 11:16:11 PM |
chembob Yankee Cowboy 27011 Posts user info edit post |
Well, I want to learn about engines and heavy machinery. I just don't have time, I guess. 9/1/2007 11:20:29 PM |
zxappeal All American 26824 Posts user info edit post |
I'm gonna give you a good laugh. You know how I learned a lot about all of it?
Sitting here in front of my computer, reading everything I could on a topic. Google FTW.
I mean, you're sitting there anyway, not doing anything especially useful. Make better use of your time.
All that said, it's the actual hands-on that is where you get the best edumacation, but you takes what you can gets. 9/1/2007 11:24:10 PM |
chembob Yankee Cowboy 27011 Posts user info edit post |
^yea
I'm more of a hands-on guy 9/1/2007 11:25:04 PM |
zxappeal All American 26824 Posts user info edit post |
What I told her.
Then she slapped me. 9/2/2007 12:06:25 AM |
chembob Yankee Cowboy 27011 Posts user info edit post |
^Now, I've been there 9/2/2007 12:07:05 AM |
zxappeal All American 26824 Posts user info edit post |
Done that, and have the t-shirt to prove it. 9/2/2007 3:00:26 AM |
Jeepman All American 5882 Posts user info edit post |
diesel PWR!!!!!! 9/5/2007 11:54:00 AM |
zxappeal All American 26824 Posts user info edit post |
DZL POWA. I been driving teh Cumminzzz every day. She'll yank a boat out of the water like nothin'...and sound orgasmic while doing it.
'sup, Jeepman? 9/5/2007 3:30:25 PM |
pwrstrkdf250 Suspended 60006 Posts user info edit post |
don't hate on the powerstrokers
dammit
no ones complained about my powerstroke yet! 9/5/2007 3:33:03 PM |
zxappeal All American 26824 Posts user info edit post |
The only complaint I've had about the 'strokes so far is the damn HEUI injection system...specifically the injectors leaking or going out altogether. And they ain't cheap. The cheapest I've seen 'em is abou 175 a pop, remanufactured.
The only thing I've ever had to do to a 'Stroke was to replace one of the two HPOP lines going to the cylinder heads on a 7.3. It had sprayed engine oil all over the place. 'twas on pwnt's Excursion; the fucker was racing somebody when it burst. That one oil line (which ain't anything more than a hydraulic line) set me back a hundred bux. 9/5/2007 4:11:47 PM |
pwrstrkdf250 Suspended 60006 Posts user info edit post |
I never had a problem with my 7.3, even with all the mods
but my 6.0 has crapped injectors and 2 fuel pumps 2x in 10k miles and it's bone stock
[Edited on September 5, 2007 at 4:18 PM. Reason : s] 9/5/2007 4:17:34 PM |
zxappeal All American 26824 Posts user info edit post |
I think the 6.0 injectors are wired and fired in reverse of the 7.3.
I need to figure out where I can post a sound bite of mine hauling a load. It makes me splurf in my britches! NYYYYAAAAAHHHHH. 9/5/2007 4:20:28 PM |
pwrstrkdf250 Suspended 60006 Posts user info edit post |
hahahaha
cool
I miss the sound of my 7.3 9/5/2007 4:25:05 PM |
Hurley Suspended 7284 Posts user info edit post |
gotta love the diesel truck pulls, the whailing, the smoke, the gawdawwwwful powa
http://www.youtube.com/watch?v=SLVFcKuEj3U
(that first ford, is that a stroke? and why the second, smaller stack? is it just an outrageous wastegate pipe, or is there some funky parallel/non-symmetrically sized turbo setup going on?)
[Edited on September 5, 2007 at 6:12 PM. Reason : an embed would be fun ] 9/5/2007 6:11:39 PM |
zxappeal All American 26824 Posts user info edit post |
I'd be willing to bet it's a wastegate setup. There are twin turbo setups for diesels, especially pulling trucks, that are different sizes. They are sequential setups, and are capable of boost of more than 100 psi.
And here's your embed:
[Edited on September 5, 2007 at 6:16 PM. Reason : embed] 9/5/2007 6:15:04 PM |
Hurley Suspended 7284 Posts user info edit post |
thanks. indeed I am well aware of sequential setups, and try my damnedest to keep up with the world of diesels pushing 100+psi boost. to me there's nothing greater than a 12V at full tilt pushing thru twin hair dryers..... hence the movie.
btw, this month's Diesel Power magazine features a 1237hp/2400lb-ft 12V, and a 66ish bronco with a 350whp 4BT that gets 30+mpg
[Edited on September 5, 2007 at 6:21 PM. Reason : -] 9/5/2007 6:19:32 PM |
zxappeal All American 26824 Posts user info edit post |
That gets me to thinking...I have an extra old-school TO-4 sitting around at my parents' house. It came off something like a carbureted Regal T-Type or a Turbo Trans Am (like REALLY early '80s). The cartridge needs new bearings, though. 9/5/2007 6:21:42 PM |
Hurley Suspended 7284 Posts user info edit post |
ehe. do it. 9/5/2007 6:22:01 PM |
zxappeal All American 26824 Posts user info edit post |
My engine has a VE injector pump...it's limited to around 230 horsepower. And the early 1st gen engines had issues with the head cracking around the injector hole.
Add to that the H1 turbo will not run out of boost with the VE pump. It's just too big. (what she said...NOT)
[Edited on September 5, 2007 at 6:24 PM. Reason : what an H1 is...] 9/5/2007 6:24:27 PM |
pwrstrkdf250 Suspended 60006 Posts user info edit post |
I used to overboost my 7.3 all the time
and it would shut down
but it was fun blowing away ricers on us 64 between here and greenville until she shut down 9/5/2007 6:27:04 PM |
dhcpme All American 1429 Posts user info edit post |
Wartsila-Sulzer RTA96-C turbocharged two-stroke diesel engine
Maximum power: 108,920 hp @ 102 rpm Maximum torque: 5,608,312 lb/ft @ 102rpm 9/5/2007 6:28:05 PM |
Hurley Suspended 7284 Posts user info edit post |
Quote : | "Add to that the H1 turbo will not run out of boost with the VE pump. It's just too big." |
could you explain a bit more?9/5/2007 6:28:29 PM |
zxappeal All American 26824 Posts user info edit post |
Seen it. Pretty amazing.
BTW, many more BIG diesels are 2-stroke than 4-stroke.
The H1 never really boosts at all unless it's under load. The exhaust turbine housing is 18cm in diameter, and the turbo has NO WASTEGATE AT ALL. Seriously, it's kind of hard to throw enough fuel to smoke heavily with the stock VE pump. You just can't turn it up that much.
You can get 'er to smoke on acceleration by changing the setting of the boost-dependent fuel control, though. But not under constant load.
[Edited on September 5, 2007 at 6:31 PM. Reason : there.] 9/5/2007 6:29:03 PM |
Hurley Suspended 7284 Posts user info edit post |
ok gotcha.
[Edited on September 5, 2007 at 6:34 PM. Reason : nevermind] 9/5/2007 6:34:38 PM |
BigBlueRam All American 16852 Posts user info edit post |
yeah, i can peg the boost guage with my cummins (40psi) on a 95 degree day. only mod is the fuel plate has been moved and the starwheel bumped a bit. egt's will easily shoot to 1400-1500 when it's pushing that much, which is piston melting time. i can safely run 30-35psi and keep the egt's around 1200.
in contrast, my 7.3 stroke will only run 25-30psi in cool weather and it's pretty heavily modified. turbo, exhaust, intake, chip, etc. i've got an sct xcal2 to throw on it to replace my banks chip, but i haven't gotten around to loading some tunes on it and hooking it up. expecting another ~50-75rwhp on the race tune and better fueling all around on the street tunes. it's been a solid motor overall. i've been through 2 injectors and 1 injector wiring harness. it's got about 135k on it now, i've probably only put 1-2k on it during the past year since i've been hurt.
greg, you just picked a bad year for the 6.0. later ones are still somewhat prone to head gasket failure, especially when you start modding, but that's easily cured with a hardware upgrade. most of the injector, rod, etc. issues they fixed for the 04+ trucks. my dad's 05 is going strong with about 40k, and he's been running a WILD tune from innovative diesel for about 20k. only problem he's had is the electronic climate control unit getting stuck on high fan.
[Edited on September 5, 2007 at 6:50 PM. Reason : .] 9/5/2007 6:48:08 PM |
Hurley Suspended 7284 Posts user info edit post |
^seriously only 25-30psi on the 7.3? a good friend of mine from back home (good ole Iredell co.) has an '01 with the ATS 88mm replacement turbo (im not sure onthe rest of the specs of the turbo, that was just the advertised spec), reburned ATS 3-stage selectable chip, and intake/exhaust - and ive hit 35psi on it at half throttle-ish under normal driving conditions. He has told me that it's neared 40 before, and has blown off an intake hose as well (stock intercooler system, single clamps etc... not saying it's the shit, just to suggest he's hitting some significant boost level).
[Edited on September 5, 2007 at 7:06 PM. Reason : -] 9/5/2007 7:03:28 PM |
BigBlueRam All American 16852 Posts user info edit post |
yup... i'm pretty sure it's the old school banks chip i'm running. these tunes on the sct xcal2 should wake it up a lot and take full advantage of my other mods. 9/5/2007 7:22:05 PM |
Hurley Suspended 7284 Posts user info edit post |
ahhh. that ATS chip reburn is a supposed +140hp on the high setting, or at least that is what was told to me. 9/5/2007 7:34:07 PM |
zxappeal All American 26824 Posts user info edit post |
You fuckin' new-fangled ballers and your got-damn chips... 9/5/2007 8:17:01 PM |
Hurley Suspended 7284 Posts user info edit post |
duuuuuudddeeeee, chips are alright for a quick gain on a new truck, buuuttt....
you know the old school is rockin when these dudes are pulling out their 24V motors and throwing in a beefcake 12V 9/5/2007 8:21:59 PM |