should have some new sights in for the glock later this week, i can push the rear sight in but don't have the front tool so i might as well have them both installed

anybody willing to install them for a decent price?

11/9/2008 9:00:33 PM

looking for a decent scope for my gun. id like something that can do between 12-36x as the max power. with 3x the smallest power. lemme know whatcha got

11/10/2008 3:27:43 AM

once again looking a good rifle for deer season

lemme know what you got if anything

11/10/2008 3:49:18 AM

Quote :

"let me know what you want for the reloading stuff for the .40 Dibs on that stuff"

If/when someone buys the gun, I'll give them first chance on it, and if they don't want it, it's yours.

11/10/2008 9:17:08 AM

Update to reloading stuff:

Here's what I have -
About 450 Oregon Trail Laser-Cast bullets(155 gr.)
About 450 West Coast Bullet Plated bullets(155 gr.)
About 200 Montana Gold bullets(200 gr.)
A bag of 230 mix-headstamp cases
A bag of 33 primed once-fired Winchester cases
A bag of 111 primed once-fired RP cases
A handful of primed nickel Speer and Winchester cases
A 4-piece Lee Deluxe Carbide die set
A couple of MTM cases

I'll take $160 firm for the whole lot - I will not break up any of it, and it's sale depends on the sale of my above listed Taurus. The buyer of it gets first dibs, then drunktyper, then whoever else.

[Edited on November 10, 2008 at 10:23 AM. Reason : dammit]

11/10/2008 10:20:59 AM

I am probably wasting my time but I am looking for an ArmaLite AR-10(t) upper

11/10/2008 6:11:29 PM

Ive got a 3 dot horton red dot scope that would work great for a small rimfire rifle. Yes, I know that horton is made for crossbows, but it works the same as any other red dot scope. I will let it go for $40. It is brand new, only on my crossbow for about 2 days before someone gave me a nice UTG scope.

11/11/2008 1:33:26 AM

It "may work the same", but the recoil of the gun, over several shots will most likely mess up your accuracy. A crossbow sight won't hold center the same as a sight designed for a rifle.

11/11/2008 10:57:15 AM

I just put my Remington 700 BDL in .30-06 up for sale on GunBroker.com: http://www.gunbroker.com/Auction/ViewItem.asp?Item=115864299

11/11/2008 4:00:18 PM

damn dude, you have/had a shit ton of nice guns. jealousy.

11/11/2008 9:51:08 PM

I know...I wish I had jumped on that LWRC when he first decided to sell it. I PM'ed him later and he told me he was going to auction it.

11/12/2008 12:28:49 AM

and man are the LWRC's nice guns. just got my srt in.

11/12/2008 9:00:30 AM

i'd venture to say the vibration on a crossbow and the vibration on a .22 LR are comparable

11/12/2008 9:51:01 AM

I know the price of assault rifles is now skyrocketing, just wondering at past gun shows what ar-15's were goin for?
Also if anyone is a guitar player i am willing to trade a marshall amp and cash for a half decent semi-auto pistol.

11/12/2008 3:01:06 PM

that's like asking "at past car auctions, what were cars going for?"

AR-15s can be found in so many different configurations that it's impossible to answer a question like that without more information.

11/12/2008 4:58:54 PM

don't care about manufacturer, just one of the cheapest .223's there, don't need it to be tricked out or anything, bone stock is fine.

11/12/2008 5:34:36 PM

Quote :

"damn dude, you have/had a shit ton of nice guns."

That's what happens when you're single with decent pay, don't care about furniture and are willing to live in older housing

I just took a significant pay cut though, so I'm selling a lot of stuff that I'm not shooting much to re-align my gun collection with what I anticipate will be in short supply in the next few years


^ I've said it in other threads, don't get hung up on the AR system. The AK is far more reliable than the AR and much cheaper to own if you search for a good deal and, once you own one, cheaper to shoot period. If you're cool with basics that go bang, it sounds like an AK might be right up your alley.

11/12/2008 5:54:48 PM

Quote :

"Lucky1 All American 5891 Posts user info edit post Ive got a 3 dot horton red dot scope that would work great for a small rimfire rifle. Yes, I know that horton is made for crossbows, but it works the same as any other red dot scope. I will let it go for $40. It is brand new, only on my crossbow for about 2 days before someone gave me a nice UTG scope. 11/11/2008 1:33:26 AM drunktyper All American 747 Posts user info edit post It "may work the same", but the recoil of the gun, over several shots will most likely mess up your accuracy. A crossbow sight won't hold center the same as a sight designed for a rifle. "

Actually, a crossbow has quite a bit of "recoil" . Not in the same sense as a rifle though. But a crossbow scope has to be made to handle lots of vibration and stay on site. It sounds crazy, but I cut my eye on another scope that I had on this bow while shooting it.

11/12/2008 6:07:22 PM

^^ appreciate it man, my uncle has an ar-15 that is a blast to shoot but any assault rifle will suffice, do you by any chance have any pistols you wanna sell?

11/12/2008 6:25:27 PM

you can still build an AR for $700 easy

11/12/2008 7:32:26 PM

^ links to cheap bushmaster parts plz.

11/12/2008 8:28:32 PM

sorry I dont have any links for bushmaster parts but...

I bought a stripped lower from PDHSC here in raleigh for $119, RRA LPK from Cold War Shooters for $70, RRA 16" upper from Ten Percent Firearms for $510, and RRA stock from Ten Percent Firearms for $75.

so just around $774 out the door and I could have gone cheaper

[Edited on November 12, 2008 at 8:36 PM. Reason : .]

11/12/2008 8:36:27 PM

any recommendations on AK's? I never have paid them much attention but would like to hear some opinions on what folks like

11/12/2008 10:05:44 PM

Quote :

"do you by any chance have any pistols you wanna sell?"

Depends on what you're looking to spend. I might be.


^ a Jim Fuller built rifle by Rifle Dynamics is probably as close to top of the line as you're going to get in an AK, but it'll cost you a bit of cash and take 3 - 6 months for him to build it. A step down would be an Arsenal ( http://www.arsenalinc.com/calibers762.htm ) for around $800 which will be a top of the line production gun out of Bulgaria.

That is the high end though. You can get a very good weapon for around $400, you've just got to look around and know what you're looking for. Gabe Suarez of Suarez International is a BIG AK proponent and does a good bit of AK specific tactical training. His forum is http://www.warriortalk.com and he has a complete section dedicated to Kalashnikov variants: http://tinyurl.com/5alqj2 I don't have time to go into the threads and find specific ones that touch on new AKs but you can find them if you look a bit.

Here is a bit I picked up on what to look for in an AK though (don't blame me for the horrendous spelling, I just copied over):

Quote :

"When looking at a AK of unknown build and quality, check for; Muzzle device removes freely when the detent is pressed in, with no evidense of chipping, nicking or gouging that may indicate a round is skipping off the brake. [exeternal wear may be acceptable, depending upon your preferance]. Crown is well shaped, with no errosion, rust, dents, dings, or gouges. Threads should be clean and well present. Bayonet lug[s] present Front sight assembly, gas block and rear sight block are straight (Very Important--Look closely!) Rear sight should be correct for the model you are purchasing Action is smooth with one soft bump as bolt and carrier ride over the hammer Magazines should move in and out easily, but lock up reasonably tight with little to no wobble proper amount of USA parts are installed Red star arms or G2 FCG used rivets are smooth and even - none over squashed or under pressed Optic rail should be even and straight with teh top of the receiver, with no pressing in on the receiver Pistol grip is fitted flush, with proper grip reinforcement plate, with no wbble present Stock should eb solide with no wobble, which is particularly important on folding stocks. There should be no wobble, and it should be lined sraight with the receiver. No dents in action cover, action cover should be tight, but still reasonable easy to remove No corrosion or rust evident on gun, external or interior Bore should be bright and shiny, with no flaking in the chrome lining, no pitting or rust evident QUALITY RECEIVER!!! NoDak Spud/DCI receiver, Adapted SAIGA or Arsenal Receivers are the best. No metal wear on the bolt or bolt head, and Firing pin protrusion should fall within accepted parameters. Finish wear in these areas is perfectly acceptable. Handguards should be tight with little to no wobble, and no gap between the lower handguard and receiver. Lower handguard should fit flush and even with the receiver. Bore should be straight and even [check this by looking through the bore across the edge of a table and comparing the shadow inside] Safety should work safely and reliably, trigger pull should be smooth, with a medium pull length Finally, general fit and finish, and what type of finish [I prefer KG Industries gunkote over park, but your preferances may vary]. "

I am by no means an AK expert, these are just some things I've picked up.

11/12/2008 10:34:37 PM

Want to Buy

.308 brass

.223 brass

11/13/2008 12:19:10 AM

I have a stripped AR-15 lower I am willing to part with if the price is right

11/13/2008 5:53:46 PM

Looking for another Remington 870. Anybody got one?

11/13/2008 6:37:49 PM

my roomate just went to Dick's in Cary the other day and picked up a Remington 870 for about $230, i think thats how much he paid for it

11/13/2008 7:02:36 PM

^^^ what are you looking to get, also what manufacturer?

[Edited on November 13, 2008 at 10:29 PM. Reason : .]

11/13/2008 10:28:57 PM

it is a LAR Grizzly lower and I have it listed on a gun board for $175 and I am having LOTS of interest so I think I will let it go for $200 unless someone wants to top that

11/14/2008 12:38:47 AM

AK wise, you may try instead of a parts kit buying a 'sporter import'. What that is is instead of being built on an american reciever, they are built as single stack butthole sporter rifles in foreign country x. A US company places the 922(r) parts, widens the magwell to accept double stacks and replaces the furniture to traditional pistol grip.

Romanian SARs, WASRs, and Bulgarian SSR-85's are like this, off the top of my head.

11/14/2008 12:49:03 AM

WTB: used, good condition Marlin 30-30 lever gun. in the $150-200 range if possible.

11/14/2008 11:00:12 AM

Quote :

"I have a stripped AR-15 lower I am willing to part with if the price is right"

PM brand and price please.

11/14/2008 12:49:27 PM

^look 3 posts above yours

11/14/2008 4:53:19 PM

thanks gopack50 im check that out this weekend

11/14/2008 7:01:06 PM

I have several Essential Arms stripped lowers, I am not in a hurry to sell them but if you really really want one I would let them ride for about $140, with a permit or ccw.

11/14/2008 10:58:29 PM

why would someone need a permit or ccw to buy rifle parts?

11/14/2008 11:43:40 PM

FS: Wahlter P-22 with Laser Mount and 2 Magazines. $300 firm.

11/15/2008 11:19:26 AM

moss 500, has stock barrel and a 28" barrel with 2 chokes, wood stock, small discoloration on the foregrip, case and 75 shells. $200 firm

11/15/2008 11:29:14 AM

^ you can get one brand new at Wal Mart for $200

11/15/2008 11:47:57 AM

you mean one of the 3 walmarts in the state that still sells guns, and try and get a 28" barrel with 2 chokes and shells for that

11/15/2008 12:11:54 PM

is that my old moss 500? did you not like it or what?

and that 28" barrel is a slug barrel with rifle sights

[Edited on November 15, 2008 at 1:01 PM. Reason : and there are plenty of walmarts that sell guns]

11/15/2008 1:01:04 PM

yea, its yours, i like it just need the money for other things right now. There are very few walmarts in nc that sell guns anymore, the last number i herd was 3 superwalmarts but im sure there are more. All the ones ive been to lately don't.

11/15/2008 2:33:34 PM

both of the ones in goldsboro and pretty sure the one in mt. olive sell guns

there's way more than 3 man

11/15/2008 6:49:16 PM

last time i was there, the walmart in Wake Forest sold em.

11/15/2008 7:58:20 PM

they come with 3 chokes brand new. two walmarts in winston salem sell guns. and you can get 100 shells for $21.00 at any of them. WTF are you smoking dude

[Edited on November 15, 2008 at 10:47 PM. Reason : ]

11/15/2008 10:46:40 PM

in his defense, that smooth-bore slug barrel with rifle sights (i remembered it's actually 24") is over $100 new

you pretty much get a bird and deer gun with it

just sayin...


i got it when i was 16 (first gun i ever bought, errr, got my dad to buy with my money) and i have half a mind to buy it back

[Edited on November 16, 2008 at 12:23 AM. Reason : 28" ported vent-rib bead sight barrel and 24" ported smooth-bore adjustable rifle sight slug barrel]

11/16/2008 12:21:59 AM

oh i see now he's selling TWO barrels. then that's not a bad deal. especially if those shells are slugs...

11/16/2008 8:09:45 AM

Looking for a GSG-5 (worth a shot eh?)

Also, possibly a AK47

Any pocket pistols for sale out there?

11/16/2008 3:58:49 PM

LAR Grizzly AR-15 lower + RRA Lower Parts Kit

$300 or I am open to trades

11/17/2008 3:00:24 PM