Got it off czcustom : http://czcustom.com/CZ-Recoil-Spring-15Lb.aspx , its round. Heard 14# was right for 115g target ammo but I just wanted to be safe and save on wear and tear!

3/22/2010 12:11:08 PM

my CHP is waiting at the wayne county sheriff's office, along with DeeMarie's

yay

3/22/2010 12:17:09 PM

The Citadel shot very well, actually. My last box of ammo was some cheap Blazer that wouldn't push the slide back enough to lock, but the other 2 types cycled well each time.

3/22/2010 2:42:27 PM

Anyone have a 9mm carbine? They sound like a hell of a good time, but pretty useless, practically speaking. I'm thinking of the Kel-Tec or the Hi-Point, which is cheaper but may be the ugliest thing I've ever seen.

3/22/2010 5:31:24 PM

looks fun (and relatively cheap) to fire



but it would be at the bottom of my list of things to get- i'd look at the gsg-5 before this (still looks fun, but even cheaper to have fun with)

3/22/2010 5:55:40 PM

a semi auto .22 rifle would be a lot better choice than one of the 9 mm carbines imo. fun to plink with, cheaper to shoot, and at least you can go squirrel hunting with it.

3/22/2010 6:09:34 PM

the old Ruger 10/22 is still one of the best "fun" guns

3/22/2010 6:11:07 PM

I have a Marlin 60 that I'm constantly shooting(being able to shoot in any direction from your front or back porch can be tempting) but I'm wanting to get something with a little more punch that I can buy(the weapon itself), shoot, and reload economically. 9mm just seemed like a good option.

3/22/2010 6:18:28 PM

any particular reason you want more punch?

3/22/2010 6:25:54 PM

Nothing too justifiable, but that's how hobbies go, I think.

In all sincerity, I love spending time around guns and I like working with my hands. Since I'm a student, I have way more time than money so I want to get into reloading. Once I pony up the cash for the reloading setup, I can afford to shoot more without feeling bad about it, but more importantly, it'll be a way to save some cash and spend time with my hobby without actually spending a shit ton of money shooting. I've been doing loads and loads of research, but my wants are all over the map. Smaller rifle cartridges like .223 would be fun, but still ~20 cent/handload. Semi-auto pistol cartridges(9mm, .380 acp or .45 acp) would be good(I'm considering a CCW) and a bit cheaper. .38/.357 would be cheaper still, and simpler to reload, but revolvers aren't really my thing. It'll be at least a couple months before I buy anything, but doing the research and shopping is half the fun.

Sorry, that got sort of "TWW is a blog" ish.

3/22/2010 6:44:34 PM

9mm carbines are fun. Target loads in a 9mm carbine length barrel are packing more punch than loads from a 357 magnum pistol. I own and enjoy a Cailco in 9mm, though I am in the market for a sig magazine model KelTec Sub 2000 as a 'packs up smaller' secondary carbine choice.

3/22/2010 6:54:01 PM

I have a Glock Carbine Conversion form MechTech, in 9mm.
Lots of fun having 33 rounds of 9mm in a rifle with my beloved glock trigger.

3/22/2010 7:29:15 PM

Survey:
What is everyone's CC piece? How do you carry it?

Also, what's your height/weight?

3/23/2010 5:52:15 PM

Define CC? and time of year? I have a LOT of guns. all but 1 of the handguns have been CC'ed by me at one point or another. I am 6' and 280 though, so I can CC anything short of an anti tank weapon.

3/23/2010 6:01:43 PM

6' 220-230lbs
CC: S&W airweight, Glock 27,23C
OC: above and G24

I carry either 2'oclock, or 4-5:30
95% OWB
3% IWB
2% other

[Edited on March 23, 2010 at 6:28 PM. Reason : .]

3/23/2010 6:27:34 PM

Me:
6' and 24- lbs.

I carry a .40 Sig 226 with a blackhawk holster @ 2 o clock
or
xd9 sub compact IBW.

3/23/2010 7:36:42 PM

XD9 Service
Summer: IWB cheapo rough-hide. 6 o'clock but reversed for right-hand pull.
Winter: under my coat 3 o'clock OWB blackhawk level 2 holster

5' 8" 155lb

I'm keeping an eye out for an XD9 SC or M&P9 SC for the right price.

3/23/2010 10:07:38 PM

5'9" 250

Bersa 380: 90% (year-round)
- Pocket: 60% (as long as it fits in the pocket)
- IWB @ 3:00: 40% (Uncle Mike's IWB Holster; relatively comfortable)

XD40: 10%
- OC: 70% (year-round)
- IWB: 30% (fall-winter only; CrossBreed IWB holster; comfortable, but bulky on me, thus I only do this when I'm wearing lots of clothing

[Edited on March 24, 2010 at 8:06 AM. Reason : .]

3/24/2010 8:06:26 AM

6'2 210lbs

70% pocket carry S&W 642
30% taurus 24/7 (9mm) IWB right hip... i slide it forward and backwards depending on what I'm wearing and what I'm doing

http://www.crossbreedholsters.com/Home/tabid/36/Default.aspx

that's a link to the site that made my holster for IWB (I have the super tuck)... it is an awesome holster, and I know several other people who have them and are very pleased with it

3/24/2010 11:16:24 AM

I put mentioned this in the classified section also, and I figure it could go here also.

I'm looking for a used 18-20'' pump-action Remington 870 or Mossberg 500 for a friend who wants something basic for home defense.

3/24/2010 12:30:06 PM

pawn shops

he could also find one new for probably around 200 bucks- tell him to call up Jim (Jim's Gun Shop) - he is out in garner, and where I got my 500, and it was super cheap (new too- he usually has a decent selection of nicely priced used guns too)

3/24/2010 1:09:25 PM

Fuquay gun & gold typically has a good selection with pretty good prices

3/24/2010 1:11:30 PM

pic of my new Kahr.



Those are Hornaday Critical Defense 9mm.

3/25/2010 9:34:58 AM

I'm eyeballing the shit out of a Kel-Tec P-11. Thoughts on this gun? I'll probably use it for CCW eventually, but for now, I want to just play around with it, become familiar and comfortable with the recoil, and, as I mentioned earlier, start reloading. At $269, it doesn't seem like a bad deal, either. I'd especially love to hear from people who have put some rounds down the barrel.

3/25/2010 6:36:13 PM

I broke down and cleaned my 10/22 today and was just curious what parts of the gun you guys normally oil during routine maintenance. In the past I've pretty much oiled everything I could get to, but I'm wondering if there is a better approach. This is probably stuff that I'd find in the user's manual, but I've never actually bought a new gun.

3/25/2010 9:20:47 PM

^^I have a P11 with the 9mm, 40, and 357 sig barrels and the slide kit. Its a decent little gun. HOWEVER, like most small guns, weak or limp wristing will turn it into a jam o matic, and you will need to fluff n buff the entire gun to make it smooth on the trigger pull, or as smooth as a double action only gets. I use it as a 1st step backup gun most days.

3/25/2010 9:59:45 PM

I went and held the kahr pocket 9mm today at Hills and it's too small. I don't think the p-11 is going to work, as I understand it is very similar in size. Are there any good 9mm semis for $300ish OTD that are just a little larger, as in still compact/subcompact size? Maybe my research is just lacking, but it seems like most manufacturers just shoot(*rimshot*) for full size or tiny, and rarely a compromise in between.

3/26/2010 2:15:38 PM

I think at this point it sounds like the best idea is to wait for the Dixie Gun and Knife Show coming on May 1-2, and just put your hands on everything you can find until one feels right.

Specs and stats online, and even pictures and video reviews, just don't compare to having it in your own hand.

3/26/2010 4:29:57 PM

Quote :

"This is probably stuff that I'd find in the user's manual, but I've never actually bought a new gun."

pretty much all user manuals for guns are online

3/26/2010 6:37:35 PM

Just snagged an LCP. Whoot Whoot

3/27/2010 2:34:27 PM

Quote :

"I broke down and cleaned my 10/22 today and was just curious what parts of the gun you guys normally oil during routine maintenance. In the past I've pretty much oiled everything I could get to, but I'm wondering if there is a better approach. This is probably stuff that I'd find in the user's manual, but I've never actually bought a new gun."

It really depends on the gun.
The 10/22 and most guns in general get wiped down with an oiled patch on all metal surfaces (including the bore) and the light film of oil is left there.
The bolt gets a drop or half drop of oil where it rubs the inside of the action. High wear internals also get a half drop of oil. These parts include the outside of a semiauto pistol barrel and hood, recoil guide rods, trigger transfer bars, pump shotgun action bars, etc.
Don't oil the trigger parts other than the light coat left from an oiled patch. Bolt action lugs get a light coat of grease as do hinge pins and the rails of some pistols if they're going to be shot a whole lot in warm weather.

3/28/2010 1:51:04 AM

^To add to that, I completely tear down and clean the 10/22's once every few thousand rounds because they tend to get gummy inside the trigger pack. I take every screw, pin, spring, rod, everything out - hose it down with simple green, scrub the hell out of it with some toothbrushes, then dry it out and wipe everything down with CLP. Put it all together again(very carefully) and it feels like a brand new gun.

Everything else doesn't get shot enough to need more than a cursory inspection and basic cleaning after a range trip.

3/28/2010 11:15:15 AM

So I just bought a high caliber spinning target for my shottie and a .40 cal handgun.. If I put it about 20 yards away - is it safe? I read that steel targets should be shot at 100 yards with a shotgun slug, but those are the fancy ones that fall down. I assume a spinning target won't be too much of a hazard, escpecially with bird/buckshot - any insight?

3/28/2010 5:13:21 PM

why are you gonna shoot birdshot at a stationary target? shoot some skeet, yo.

3/28/2010 6:05:45 PM

I will be doing that also

3/28/2010 6:22:47 PM

As a mere youngin' (20), I can't buy a pistol straight up. Obviously, my papa can buy one and I can shoot it and whatnot, then "buy" it from him after my birthday. However I've recently heard that if he gets it, as a direct family member, he can gift it to me, and since I'm 18+, it's perfectly legal for me to own/possess. With that said, I've also heard exactly the opposite. So, can anyone shed some light on NC's confusing-ass gun laws?

3/29/2010 12:10:05 AM

I'm pretty sure your dad can buy it and give it to you, but someone around here will know the details of the law.

You might also be able to buy in another state if you have to go that route.

3/29/2010 12:12:38 AM

I'm no lawyer, but here's some info...

http://www.grnc.org/firearms.htm

Quote :

"North Carolina law does not currently address specific age requirements for the purchase of weapons. Rather, it looks to the federal standards for such restrictions. Under federal law, 18 U.S.C. § 922(b)(1), federally licensed gun dealers are prohibited from selling handguns to persons under the age of 21. Further, all other purchasers of shotguns and rifles are required to be at least 18 years of age."

Quote :

"North Carolina General Statute § 14-269.7 provides that it is a misdemeanor for any person under the age of 18 to possess or carry a handgun...."

Quote :

"North Carolina General Statute G.S. § 14-315 prohibits any person from selling, offering for sale, giving away, or in any way transferring to a person under the age of 18, any pistol cartridge... This statute further provides that it is a Class H Felony for a person to sell, offer for sale, give, or in any way transfer to a person less than 18 years of age, any handgun as defined in N.C.G.S. § 14-269.7. Additionally, an individual guilty of this offense shall forfeit the proceeds of any sale made in violation of this section. This law does not apply under the following circumstances: A. when the handgun is lent to a minor for temporary use if the minor's possession of the handgun is lawful under N.C.G.S. § 14-269.7 and G.S. § 14-316 and is not otherwise unlawful; B. when the handgun is transferred to an adult custodian, pursuant to Chapter 33A of the North Carolina General Statutes, and the minor does not take possession of the handgun except that the adult custodian may allow the minor temporary possession of the handgun in circumstances in which the minor's possession of the handgun is lawful under N.C.G.S. § 14-269.7 and N.C.G.S. § 14-316 and is not otherwise unlawful;"

Basically your dad can buy a handgun and lend it to you. He cannot give/sell/transfer ownership to you even though it seems like he should be able to do so. NC law says it can be transfered to you if you're over 18, but any transfer requires a purchasing permit...which the sheriff wont give to you unless you're 21.

3/29/2010 12:46:12 AM

eh, nvm ^ is right on.

[Edited on March 29, 2010 at 8:24 AM. Reason : too early]

3/29/2010 8:22:20 AM

Quote :

"So I just bought a high caliber spinning target for my shottie and a .40 cal handgun.. If I put it about 20 yards away - is it safe? I read that steel targets should be shot at 100 yards with a shotgun slug, but those are the fancy ones that fall down. I assume a spinning target won't be too much of a hazard (regarding ricochet), especially with bird/buckshot - any insight?"

3/29/2010 11:04:19 AM

Steel targets are always a hazard to some point (of course, firing a gun is a hazard in itself).

Is it a spinning target that hangs down?
If so, I wouldn't worry about the distance unless you're right in front of it or perpendicular to it with someone else shooting at it.
When you shoot at a spinning target the bullet is going to bounce at an angle that's perpendicular to the rotation of the target, meaning somewhat downward (or somewhat to the side if it rotates on a vertical axis). So don't put the target 10 feet off the ground then shoot at it (no brainer).

I think the biggest steel target hazards are big heavy free standing plates shot with jacketed bullets. If you shoot one of those there's no telling where the bullet will bounce back because the plates don't move much or move well after the bullet has bounced off.

3/29/2010 11:31:02 AM

ok, cool. Yes it is one that is hanging down... and it is a prairie dog





[Edited on March 29, 2010 at 11:44 AM. Reason : /]

3/29/2010 11:43:57 AM

That'll handle 40S&W?
kick ass

3/29/2010 11:54:13 AM

Well, it says it is rated for 9mm-30.06 high caliber rifles

[Edited on March 29, 2010 at 12:43 PM. Reason : I may blow a few holes in it.. we will see]

3/29/2010 12:41:40 PM

You can try and get a purchase permit through your sheriffs office at age 20, but bring a parent with you.
Federal law says that to purchase from an FFL you must be 21. Nothing in NC law specifies private party sales. You should be able to get a permit and purchase or be gifted the pistol from your dad at age 20.

3/29/2010 4:18:02 PM

There are a few folks in Nc who have gotten purchase permits under 21. It is entirely the discretion of the sheriff, and you're most likely not going to convince him. It's worth a shot though(no pun intended). As stated, federal law prohibits you from buying from an FFL. You would be limited to private party sales.

3/29/2010 5:24:13 PM

I'm not a fan of steel targets, but that is simply because I've seen too many youtube videos like these:


http://www.youtube.com/watch?v=VyhgC4wF7MU

http://www.youtube.com/watch?v=IPZyBLv0ijc&feature=fvw

http://www.youtube.com/watch?v=3cqAffzjUrU&NR=1

3/30/2010 4:53:28 PM

well I am hoping the fact that it rotates will take away 99% of the chance for a direct ricochet

3/30/2010 5:11:54 PM

Is a stainless Para-Ordnance 1911 (SF-45A) any better than my stainless Springfield loaded model? I think as far as gucci features go, they're pretty comparable, other than the Para having an accessory rail.

My squadron is trying to put together a group buy on the Para. We're gonna get them custom engraved with the squadron logo (Playboy bunny).


I'd like to have a deployment pistol, but I don't see any reason to have two nearly identical 1911s.

I wonder how much I could sell my Springfield for (stainless loaded model, match bushing, trigger job, slide bead-blasted for matte finish).

3/30/2010 11:54:42 PM

i wish i had money laying around because I would love to have that pistol

3/31/2010 7:47:15 AM