Does anyone know hoe to adjust valve lash on them ?

3/29/2006 11:17:44 PM

play around with your valve lash adjuster

3/29/2006 11:30:51 PM

well it runs fine above 3500 till 8500 but when just crusin them valves are clicken is that going to hurt anything or it will be allright? only about 60k on engine

3/29/2006 11:33:41 PM

valve adjustment my good man.

get a long skinny flathead screwdriver, hollow drive 10mm ratchet, and some feeler guages.

rip off valve cover. start at cyl 1 at TDC and do intake and exhaust valves, the factory specs should be on the hood of the car that the motor came from, or look them up on honda-tech.com.

you can do them to spec, or a tad on the higher side of the spec.

then proceed with the firing order.
1-3-4-2

c-speedracing.com (or .net not sure) had a pretty good write up. and check on honda-tech.com also

[Edited on March 29, 2006 at 11:58 PM. Reason : ]

3/29/2006 11:58:18 PM

thanks yo i didnt know if the vtec was any diffrent

3/29/2006 11:59:23 PM

http://www.honda-tech.com/zerothread?id=618786

honda-tech is your friend....not tww

3/30/2006 12:09:31 AM

your right T/Y!!!

3/30/2006 2:39:19 AM

Quote :

"3500 till 8500"

8500rpm on a h22? wtf have you done to that shit?

3/30/2006 1:37:08 PM

it has valve job chromoly pistons and rings it has titanume retainers cold air intake header carbon flywheel stage 3 clutch and plate

3/30/2006 2:50:25 PM

why did you get a stage 3 clutch?
the mods don't warrent that much clamping force

3/30/2006 4:40:38 PM

why do you care how he spends his money?

3/30/2006 4:48:15 PM

^why are you all of a sudden so worried about what i post? quit being an asshat

i don't care how he spends his money i was just asking why he went stage 3
i have an h22 and just felt like asking questons about someone else's

[Edited on March 30, 2006 at 5:09 PM. Reason : .]

3/30/2006 5:03:40 PM

i just got a good deal on it saved about 60 bills for the stage 3 my friend had it sittin around so i got it only reason why

3/30/2006 5:37:14 PM

i would get a stage 3 clutch

no worries about clutch slippage, better clutch feel, and

chirping high gears

3/30/2006 7:13:19 PM

Quote :

"Norrin Radd All American 542 Posts user info edit post why did you get a stage 3 clutch? the mods don't warrent that much clamping force 3/30/2006 4:40:38 PM beethead All American 4351 Posts user info edit post why do you care how he spends his money? 3/30/2006 4:48:15 PM Norrin Radd All American 542 Posts user info edit post ^why are you all of a sudden so worried about what i post? quit being an asshat i don't care how he spends his money i was just asking why he went stage 3 i have an h22 and just felt like asking questons about someone else's"

The problem is how you asked the question. You could have just left it at the question, but the second comment you added is confrontational like you know better than he does before you even learned why he added the thing (which was what your question was in the first place).

If you would have left it at that, beethead probably wouldn't have said anything.

3/30/2006 7:33:40 PM

yall niggaz dont know shit bout some all motor

3/30/2006 8:52:19 PM

i will race that ac you got any time

3/30/2006 8:59:20 PM