Patman All American 5873 Posts user info edit post |
Ok, I feel dumb.
I need to replace my air filter. I unscrewed the four screws to get at it, but it will only open about an inch. Not enough room to replace it. I think I need to disconnect something. Does anybody know what I should disconnect and how to disconnect it? 7/23/2007 6:51:09 PM |
optmusprimer All American 30318 Posts user info edit post |
disconnect yourself from the screwdriver and drive down to a bookstore and get a manual. preferably one marked "accords for dummies" 7/23/2007 10:02:22 PM |
slingblade All American 12133 Posts user info edit post |
You probably just have to wiggle it, sometimes they have strange hinges on them and you have to wiggle them out. 7/23/2007 10:05:24 PM |
69 Suspended 15861 Posts user info edit post |
take the damn intake boot off and it will pull right off 7/23/2007 10:16:50 PM |
Seotaji All American 34244 Posts user info edit post |
the filter housing catches on the edge of the fender. push it away slightly from the fender and pull up.
Quote : | "take the damn intake boot off and it will pull right off" |
this too. take the metal band off the end of the housing and it's easier to remove or just slide the housing out of the tube.7/23/2007 10:34:51 PM |
Senez All American 8112 Posts user info edit post |
watch it, you might make him render his accord slightly inoperable 7/24/2007 9:00:34 AM |
Patman All American 5873 Posts user info edit post |
It looks like the intake manifold hose will flex fine. But there are two other hoses going into it that are the problem. Do they pull straight out or twist out what? I just don't want to break them.
[Edited on July 24, 2007 at 12:27 PM. Reason : ?] 7/24/2007 12:19:30 PM |