3/16" Diameter. Need to borrow a bit that's at least 18" long. Anyone have one?

8/24/2009 3:54:50 PM

Wood. Metal. Concrete.

8/24/2009 5:50:55 PM

metal

8/24/2009 6:07:15 PM

details plz

8/24/2009 9:53:34 PM

i've got some that long, not sure if i've got one that small though. i'll dig around in all the junk that came off my f350 tomorrow.

do you need the length for access, or you need to go through something that thick?? i believe i've at least got an extention you could put a regular bit in if that would work...

[Edited on August 25, 2009 at 12:10 AM. Reason : 3/8" is the smallest diamter for my long bits iirc... maybe 1/4"]

8/25/2009 12:07:42 AM

I might still have some at the shop if someone hasnt fucked them up like everything else i have left down there.

8/25/2009 12:37:20 AM

if its for something that thick there is no borrow to it of course i'm sure you'll use cutting oil cause you know what your doing... but i still think the bit would be nearly worthless upon return

8/25/2009 7:51:52 AM

length for access, the hole is already there i just need to make it a little cleaner and what i have isn't quite long enough to reach it and do the job well

8/25/2009 10:38:54 AM

just get one at lowes and take it back when you're done

8/25/2009 1:16:41 PM

lowes has those?

8/25/2009 9:58:18 PM

okay, i've got the extension thing. none of my long bits are that small in diameter, though.

8/26/2009 12:30:56 AM

I only need it to open up a preexisting hole in some very soft zinc

8/26/2009 7:57:23 AM

i got you one yesterday.

8/26/2009 9:15:28 AM

its probably mine

10/15/2009 10:14:05 AM