User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » 2001 Passat Electrical Problem Page [1]  
quiksilver
Veteran
769 Posts
user info
edit post

After tracing wires all morning I am desperate for help. Thought maybe someone would know what could cause these problems.
The Problems:
1. Power windows stopped working. If i use the key feature where you lock then unlock twice they roll down and up but none of the buttons work to roll up/down.
2. Key Fob turns alarm system on and off but does not actually lock the doors
3. Warning chimes stopped working (does not chime when keys are left in or lights are on)
What I have tried:
1. Checked all fuses
2. Pulled out CCM from under the drivers floorboard. No sign's of corrosion or broken wires. Circuit board looks to be in great condition no rust or any signs of breakage.
3. Checked all wires running from CCM for breakage/corrosion. No luck.

Anyone have experience with this? Any idea's or help would be greatly appreciated. At this point I'm beating my head against the wall for ideas.

10/10/2009 3:24:28 PM

Ragged
All American
23473 Posts
user info
edit post

when you say none of the windows work, do you mean each individual switch or just the one on the driver door?

10/10/2009 4:50:44 PM

quiksilver
Veteran
769 Posts
user info
edit post

None of the buttons in the car (all doors) will roll the windows up or down. However, the window motors are getting power because there is a feature in which you can control the windows using the key. This feature works. To me it doesn't appear to be a motor or power problem. Appears that that the buttons are not sending the signal to the motor.

10/10/2009 5:09:11 PM

MaximaDrvr

10401 Posts
user info
edit post

sounds like your CCM is just screwed.

10/11/2009 12:08:29 AM

optmusprimer
All American
30318 Posts
user info
edit post

remove the carpets. trust me, what you see will amaze you.

10/11/2009 3:26:40 AM

quiksilver
Veteran
769 Posts
user info
edit post

Was going to remove door panel today to look for broken wires? Is this a waste of time? Are you serious about removing carpets? I was able to see the wiring going to and from the CCM and it looked good. No water damage or anything. Is there something else that I should be looking for under there? Thanks for the input and ideas.

10/11/2009 8:57:17 AM

optmusprimer
All American
30318 Posts
user info
edit post

remove the front carpeting

10/11/2009 1:19:32 PM

69
Suspended
15861 Posts
user info
edit post

^^

ccm is fucked

10/11/2009 7:52:10 PM

69
Suspended
15861 Posts
user info
edit post

^

ccm is fucked

10/11/2009 7:52:10 PM

 Message Boards » The Garage » 2001 Passat Electrical Problem Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.39 - our disclaimer.