Gonna find out if it's worth fixing this.Looks like the knuckle, strut and inner CV boot as well as a few ball joint boots are toast and obviously quarter panel.
12/2/2017 8:19:40 PM
I have bottomed out these pickle forks and the lower arm ball joints still won't free
12/3/2017 1:15:31 PM
assuming you're in Raleigh.https://www.lkqpickyourpart.com/locations/LKQ_Pick_Your_Part_-_Raleigh-168/recents/Pick and pull what you need and keep on rolling. Depending on how you feel about the rest of the car (do you feel it'll last you a few more years, etc), it may be worth just making the ~$300 investment to get it derivable again... Maybe. There's still a lot of variables to consider...[Edited on December 3, 2017 at 2:39 PM. Reason : .]
12/3/2017 2:37:52 PM
I was just going to use it to get back and forth from work and keep miles off my truck. She is gonna get a new car regardless. If I have to work this hard at a junk yard the parts will need to be cheap.
12/3/2017 3:11:46 PM
12/3/2017 3:15:24 PM
i got that nut almost to the hilt and all it gave me was some threads to file down when it shot off
12/3/2017 7:57:27 PM
that jackstand makes me nervous as hell
12/3/2017 8:00:47 PM
Meh there is another one just a bit further down and the jack
12/3/2017 9:10:24 PM
Heat and beat
12/4/2017 7:46:28 PM
i don't trust folks who work on cars with claw hammers
12/4/2017 8:14:11 PM
I should have used two 4 lb sledgehammer to hit both sides at the same time. Since I only have one I guess you shouldn't let me work on your car.
12/4/2017 8:36:50 PM
just busting your balls, dudegotta piss with the cock you got. i understand.
12/4/2017 10:08:09 PM
Got it rolling again
12/23/2017 5:09:42 PM
nice, you set the toe with string or what
12/24/2017 11:27:51 AM
Congrats!
12/27/2017 9:50:42 AM